Home » News » Heating System In Houses

Heating System In Houses

“If the chain is long and complicated, then to calculate the system so that nowhere was too hot, or, conversely, not enough heat – not an easy task. And any design error can be fatal, “- said Anton Belov. Secondly, make a heating system of a private house any changes, “lengthen” it or add additional Heaters later is often impossible. Therefore, if you choose to attach to the house of an additional room or, for example, to equip a guest room in the attic, then back to heating will not be easy. Third, the Single-pipe heating system is less efficient: the heating of the house of the same area, it will almost always spend more heat than the two-pipe. The reason is simple. In two-pipe system coolant flow depends on how much heating devices currently on and on how much power. If all the radiators are shut, the circulation will not be reset and boiler capacity.

In one pipe, where the radiators are connected in series, Heated water must circulate constantly, even when the system is idling. In contrast to the single-pipe, two-pipe system is much more variable. For example, it can be done with both the top and the bottom feeding coolant. Also, use different wiring schemes that maximize account planning features and your needs. Most often for heating private houses found wiring diagrams “train” (When the forward and reverse pipelines consistently visit all heaters) and “star” (in this case from the collector to each heating appliance is a proper pair of tubes).

Posted in News and tagged as

Comments are closed.